ciaco asa nat reflection one public ip address

Nat (inside,outside) static inside_mapped ! Create also a static NAT mapping of 10.10.10.1 Web Server to itselfĬiscoasa(config)# static (DMZ, outside) 10.10.10.1 10.10.10.1 netmask 255.255.255.255ĮDIT: NAT Commands For Cisco ASA version 8.3 and later: 2) For inbound communication (Internet towards Web Server), create again a static mapping on the ASA for address 10.10.10.1 to itself, and perform static NAT on the Cisco Router to map 10.10.10.1 to 50.50.50.3īelow I will show you snapshots of the configuration for both the Cisco Router and the Cisco ASA that will achieve the functionality above.Ĭiscoasa(config)# interface GigabitEthernet0/0Ĭiscoasa(config-if)# ip address 10.0.0.2 255.255.255.0Ĭiscoasa(config)# interface GigabitEthernet0/1Ĭiscoasa(config-if)# ip address 192.168.1.1 255.255.255.0Ĭiscoasa(config)# interface GigabitEthernet0/3Ĭiscoasa(config-if)# ip address 10.10.10.2 255.255.255.0.Rather create a static mapping of 192.168.1.0 to itself (will see this below) and configure NAT overload on the Cisco Router for the network 192.168.1.0/24.

1) For outbound communication (Internal LAN towards the Internet), do not translate the network 192.168.1.0/24 on the Cisco ASA.The way I would configure such a scenario is the following:

Ciaco asa nat reflection one public ip address